First-Time Operation
Using the Hand Strap
Fitting the Strap to Your Hand
Hold the camcorder against your chest, and pull the strap down until the velcro patches open. Then put your thumb close to the Power Zoom buttons, pull the strap tight until it fits snugly, and seal the velcro closures.
Caution:
•Do not swing the camcorder by its hand strap. Power Zoom Buttons
Attaching the Shoulder Strap
1 Hold one end of the strap and thread it through the loop on the left side of the monitor.
2 Thread the end of the strap through the long slider and move the long slider in the direction of the arrow to secure.
3 Loosen the strap in the buckle, and then feed the end of the strap through, as shown.
4 Draw the strap in the direction of the arrow (Q), and then secure the end of the strap with the short slider (W).
15
Loop
Loop
26
Long slider
| Long slider |
|
3 | Buckle | 7 |
| Buckle | |
|
|
48
Short slider
Short slider
Handling the LCD Monitor
•Do not let anything press against the monitor screen or expose the screen to shock, as it may break.
•Do not put the camcorder on a table, or any other surface, with the monitor screen facing down.
•Use a soft clean cloth to clean the screen.
22
