![](/images/new-backgrounds/1291869/29186975x1.webp)
Basic Operations Playback
•Refer to pages
Playback
The LCD monitor makes it possible to play back and see what you have just recorded. Nothing needs to be connected, allowing instant
1 Hold down the Lock button and slide the Power switch to VCR. It make take some time for the screen to appear. Wait
Lock Button
until the screen appears before starting operation.
2 Press the MENU button until appears on the monitor.
PLAYSTILL
R
EF
WF
PHONE Jack
Caution:
•To use the infrared remote control, make sure that the remote control menu item (“REMOTE”) is set to “ON”. The remote control cannot be used to operate the camcorder when this menu item is set to “OFF”. See page 39.
Volume Control
While the camcorder is in the VCR mode, press the VOL. C or D button to increase or decrease the volume to your preference.
The volume control indicator will appear on the monitor. After adjusting the volume, if the Volume control buttons are not pressed, the indicator will disappear by itself shortly.
3 If the tape is not at the desired point, press
Cor B on the operation button ( ) to select “FF” (Q) or “REW” (W).
PLAY/STILL
R
EF
WF
Operation button
4 Press on the
button to select “PLAY”.
PLAYSTILL
R
EF
WF
To Stop Playback
Volume
VOLUMEControl
Buttons
Decrease Increase
Note:
•The volume can also be adjusted with the remote control.
Press Aon the button to select “STOP”.
Auto Tape Rewind
The tape is automatically rewound when playback reaches the end of the tape.
Notes:
•If you wish to turn off the operation indicators on the monitor (e.g. because they interfere with your view of the picture), press the MODE DISPLAY button. The buttons will still function as indicated even after their indicators are turned off.
•Stereo earphones with a 3.5 mm diameter plug can be plugged directly into the PHONES jack below the monitor. When you use this jack, the speaker automatically turns off.
34
Fast Forward and Rewind
Press B or C on the button to select “FF” (Fast Forward) or “REW” (Rewind) on the
screen (VCR mode) during a stop mode.
Searching for and Playing Back a Scene Far from the Current Tape Position
When fast forwarding (or rewinding) a tape, press B on the button to select “FF” (or C to select “REW”) on the
screen (VCR mode). The fast forward (or reverse) playback picture is displayed
Release the button to return to normal fast forward (or reverse) mode.