Casio MPC-501 manual Turning on Power, To turn on the power

Turning on Power

To turn on the power

Important

Though it may take a few moments before anything appears on the display, you do not need to keep the power switch depressed. Simply press it once and release it.

1

After waiting for a few minutes, “Welcome” dialogue message appears followed by “Windows Product Key” dialogue message. By pushing the Fn and – keys at the same time the Mobile Keyboard pops up on the screen. Enter each requested user’s information by using this keyboard and the 10-key pad.

Do not shut down the power once the Windows 98 setup procedure starts. Also, be sure to power FIVA with its AC adaptor while performing the setup procedure. After turning power off, wait for at least 10 seconds before turning it back on again.

	te
o
N

The first time you turn on the power, you must perform a Windows 98 setup procedure.

Consult your original detailer for information about the setup procedure.

You need to perform this procedure only once. After that, Windows 98 will boot up automatically when you turn on the power.

•The screen goes through a number of changes and may even flicker while Windows 98 is starting up. This is normal and does not indicate malfunction of FIVA.

•FIVA’s is equipped with “power management” functions that automatically go into a low-power standby or hibernation mode if you do not perform any screen touch or keyboard operation for about 10* minutes. Input data on the screen when the low-power Standby or Hibernation is entered is automatically saved, so the screen reappears on the display when you recover from a low power mode.

33