Software Problems
Symptom | Recommended Action |
Cannot perform infrared data communi- | Make the proper infrared port settings. |
cation. | • Make sure the data transfer speed set |
| for FIVA is the same as that set on the |
| other device. |
| • Make sure there are no obstructions in |
| the infrared path between the two |
| devices. |
|
|
Cannot send data correctly using | Make sure the data transfer speed set for |
infrared data communication. | FIVA is the same as that set on the other |
| device. |
| • Change the distance between FIVA and |
| the other device. |
| • Move the two devices to an area that is |
| not exposed to direct sunlight or |
| fluorescent lighting. |
|
|
Sound output is too slow. | Turn off sound playback and then turn it |
| back on again. |
|
|
Sound output is broken. | Tap the Mobile Cockpit CPU icon and |
| then use the slider to set the CPU Clock |
| Speed to 100%. |
| • Quit other applications before the |
| adjustment. |
|
|
Audio skips during audio playback or | These conditions are caused by any of |
communication errors occur during | the followings. |
communication from the multi- | • Changing the power supply between |
communication port. | AC adaptor power and battery pack |
| power |
| • Running the battery report |
| • Large load on the FIVA CPU |
| • Reduction of CPU clock speed due to |
| internal overheating |
|
|
Occasional inability to record from the | Change the volume control setting or |
microphone or output sound from the | FIVA. See page 85 of this User’s Guide for |
speaker. | information about using the speaker. |
|
|