2)To change replicator COM port settings

The factory default setting for the COM1 Port setting of a model equipped with a built-in modem is “Multi-Communication Port.” When using FIVA with an optionally available port replicator, you must change the COM1 Port setting to “Port Replicator” before connecting a peripheral device to the replicator’s serial port.

On the BIOS Settings screen, tap the COM Port tab.

Under COM Port 1, tap the selection button next to “Port Replicator”. To use the built-in modem, you must first change the COM1 Port setting back to “Multi-Communication Port.”

Check this item.

Tap the OK button.

3)Password Settings

You can register a password up to eight characters long to keep others away from using FIVA. Once you register a password, a prompt for password input will appear any time you turn on power or return to Windows 98 from the Hibernation Mode. In such cases, FIVA cannot be used until the correct password is input.

If you forget your password, you will no longer be able to startup FIVA. Make sure you keep a separate record of the password or that you use a password you can remember easily.

78

Page 78
Image 78
Casio MPC-501 manual To change replicator COM port settings, Password Settings