Samsung HMX-U10UP/U100UP, HMX-U10EP/U100EP Connecting a pOWER Source, Charging the battery

preparation

CONNECTING A pOWER SOURCE

•Be sure to charge the battery before you start using your camcorder.

•This camcorder features a built-in battery that can be charged by connecting the AC power adaptor. There is no need to replace batteries.

•The battery may be charged a little at the time of purchase.

Charging the battery

You can charge the battery using the AC power adaptor or USB cable.

1.Press the Power ( ) button to turn off the camcorder.

2.Open the jack cover of the camcorder.

3.Charge the battery using the AC power adaptor or USB cable.

•The CHG (charge) lamp lights up and charging starts. When the battery is fully charged, the charging (CHG) lamp turns green.  page 15

	Connect the AC power adaptor to
Using the AC	the camcorder properly and plug
power adaptor	the AC Power adaptor in the wall
	outlet.
	Connect the USB cable to the
Using the USB	camcorder properly and connect
cable	the other end to a USB port of a
	PC.

Using the AC power adaptor

Using the USB cable

14_English