Using Concord 1500 AS a WEB Camera

ENU

You may also use the camera as a web camera and a video conferencing camera.

Note:

The camera driver must be installed before connecting the camera to the computer to play PC Cam for the first time.

1.Install the camera driver from the supplied CD-ROM.

2.Power on the camera, and press the button until “ PCC “ is displayed on the LCD of the camera.

• The display of “ PCC “ on the LCD indicates the camera’s entry to the PC Cam mode.

3.Connect the camera to the computer.

4.Launch Microsoft NetMeeting software.

Note:

If you do not have NetMeeting already installed on your computer, please visit www. microsoft.com for instructions and free download.

REMARKS ON PC CAM INSTALLATION UNDER DIFFERENT WINDOWS OS

When the camera is used in the PC Cam mode and connected to the computer for the first time, the computer will automatically find your camera and install it, the installation message will vary on the different Windows Operating Systems.

Under Windows 98SE

1.The following message will pop up, indicating that the Windows system recognizes a new device and is searching for the driver.

2.The following message will pop up to ask for insertion of Windows 98SE CD-ROM. Insert the Windows 98SE CD-ROM into the CD-ROM drive, then click “OK”.

3.Click “Browse” to find the driver.

4.Make sure the drive option is CD-ROM drive, then locate and double click Win98 folder, then click “OK” .