Concord Camera JD C3.1z3 Taking Pictures, Setting the CAMERA’S Operational Modes, Review Mode

GETTING STARTED / TAKING A PICTURE

SETTING THE CAMERA’S OPERATIONAL MODES

The camera has 3 operational modes: Camera Mode, Review Mode and Video Clip Mode.

To change the camera operational mode, slide the mode switch horizontally to the corresponding position.

ENU

Camera Mode For taking pictures or customizing your camera settings for picture taking.

Review Mode

For browsing images and video clips, deleting images and video clips, playing

a slide show, transferring images and/or video clips from the internal memory to the SD card, or rotating images.

Video Mode

For recording video clips or customizing camera settings for video-clip recording.

TAKING PICTURES
LIVE VIEW THROUGH THE VIEWFINDER
A	4	28/45
fig.1.1	fig.1.2

A 4	28/45
fig.1.3

1.Turn the camera on.

2.Set it to ( ) Camera Mode.

(To save battery power, press the ( ) button to turn off the LCD display).

3.Aim the camera at the subject, then look through the Viewfinder to frame the desired object(s) to be included in the photo. (fig.1.1)

Note: For better results, stand at least 2 ft (0.6m) away from the subject.

4.Press and hold the Shutter button halfway down to activate the Auto-Focus function until the green AF LED stops blinking and the AF frame on the LCD changes to green. (fig.1.2)

(The camera will automatically determine the best focus, and a rapid click can be heard.)

5.Hold the camera steady with both hands, then firmly press the Shutter button down fully to capture the image. (fig.1.3)

•When the image is captured, a beep can be heard.

•After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate that the image is being stored.

9