Concord Camera JD C3.1z3 manual Setting the Flash, To set the flash

SETTING THE FLASH

A 3M 28/45

TAKING A PICTURE

3M 28/45

AWB

AWB

	fig. 1.1		fig. 1.2	fig. 1.3
To set the flash:
Press	/	repeatedly until the desired indicator appears on the LCD.
Flash Mode			Description
A Auto Flash (Default)			The camera judges if a flash is required. If the environment is too dark,
			the flash will fire.
A	Auto + Red-Eye		Use this mode to reduce the occurrence of	“red-eyes” when taking pictures
			with a flash. The camera will automatically detect when the flash is needed
			and the flash will fire after a short delay.
	Flash ON		Flash will fire in any lighting condition. The “red-eye” reduction function also
			included in this mode.
	Flash OFF		In this mode, the flash will not fire, regardless of the lighting condition. Use
			this mode to capture the mood of ambient lighting. This mode is also useful
			for places that prohibit flash photography, such as museums, aquarium,
			archeological exhibitions, etc.

•To prevent blurry pictures in dim-lighting environment, hold the camera steady when pressing the Shutter button or mount the camera on a tripod.

ENU

Note:

•The flash needs to recharge after it is fired. If the Shutter button is pressed when the flash is charging, the Flash Ready LED will blink. Wait for a short while, then press the Shutter button again to take a picture.

•Some of the scene selection will deactivate the flash setting. For more information, refer to p. 20.

12