RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
RESTORING FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1.In the Setup Menu, press 
or 
until Restore Default is highlighted.
2.Press 
or 
to highlight No or Yes, and then press OK to confirm.
•If No is selected, no change is made. The LCD returns to the previous screen.
•If Yes is selected, the LCD shows “Are you sure?”
3.Press 
or 
to highlight Yes or No, then press OK.
•If No is selected, no change will be made. The LCD returns Setup page.
•If Yes is selected, the camera will be reset to the factory default setting. The LCD will show “Restoring....” and then return to setup page. The Default settings will be restored.
The table below lists the default settings:
OPTION | DEFAULT STATUS |
|
|
Camera Mode | Single Shot |
|
|
Image Size | 2048 x 1536 |
|
|
Quality | Normal |
|
|
Flash | Auto Flash |
|
|
White Balance | AWB |
|
|
LCD Brightness | Center (0) |
|
|
Scene Selection | OFF |
|
|
Digital Zoom | Yes |
|
|
Exposure Compensation | 0 |
|
|
ISO | Auto |
|
|
Metering | Matrix |
|
|
Photo Effect | None |
|
|
Time Out | 2 Min |
|
|
Slide show interval | 2 Seconds |
|
|
Beep | On |
Quick View | 1 Sec |
|
|
AF Mode | |
Continuous Repeat | Off |
|
|
AF Assist Light | Auto |
|
|
TV Mode | NTSC for USA/Japan, PAL for Europe/Asia |
Date/Time Format | USA/Japan: MM/DD/YYYY, |
| Europe/Asia: DD/MM/YYYY, |
|
|
ENU
44