Megapixel Cameras and Surveillance Software | User Manual |
Archive
Archive is a
“Filter” is a group of archiving options:
“Save all frames” enables archiving the entire video stream received from the camera.
“Save all and mark motion” enables saving the entire video stream and marking the frames when motion was detected for future archive browsing.
“Save only motion” enables archiving only when motion was detected by the
“Frequency” is a
“Continue after motion detected” is a drop- down list of options for the duration of archiving after the motion was last detected by the
Motion Detection
Motion detection is achieved by analyzing
The software mode performs motion detection by processing the images after they were transmitted from the camera to the computer. In contrast, the
Motion detection is enabled via the Archive settings when one of the two following options is selected: “Save all and mark motion” or “Save only motion”. If the Archive is enabled for “Save all frames”
CBC (America) Proprietary Information | p.21 |