Access Control / Permission, Remote Viewing

Megapixel Cameras and Surveillance Software

User Manual

Access Control / Permission

“Access Control” or “Permission” is used to set up password-protected access to CBC Video System. For any user there are three levels of access available (from the drop-down list):

“Administrator” grants full access to all features of CBC Video System.

“Viewer” grants access to live video and browsing the archives, but not to the settings.

“Live only” grants access to live video only.

Adding, changing, and removing the users is done via three buttons “Add”, “Change”, and “Remove” on the bottom of the menu.

Remote Viewing

MPS software has built-in web server allowing CBC cameras and archives to be viewed remotely.

“Allow Remote Viewing” enables the built-in HTTP server. Click “Apply” then click “Ok” on the bottom of the menu.

Start Internet Explorer and type in the address of the web server. For example, if CBC Video System is installed on a PC with IP address 200.168.1.102, type in the following address:

http://200.168.1.102:4250/guix.htm

Then click “Enter” to have Internet Explorer open that page.

Upon successful connection a web page will open. Internet Explorer will prompt to install an ActiveX component. Click on the webpage as prompted to install ActiveX.

The main CBC menu located on the left hand side of the IE window will provide full access to each CBC camera. Selecting the CBC camera of choice will display the option to disconnect as well as make changes to settings such as the Resolution, Speed, Archive, Zoom and viewing images in separate windows.

Right-clicking anywhere on the Explorer web page will provide access to the options menu:

“Save” to take a snapshot image.

“Manage Servers” provides server information and allows changes to the servers.

“Auto Hide Menu” allows to automatically hide the main menu.

“Settings” to adjust camera and video settings.

CBC (America) Proprietary Information

p.24