Pioneer DVH-P4100UB operation manual Available accessories, Using the position selector

	Section
Available accessories	03

#When playing discs recorded with more than

96 kHz sampling frequency, you cannot use audio functions. Also, equalizer curve setting, POSI, AUTO EQ and AUTO TA will be canceled.

#When playing discs recorded with more than

96 kHz sampling frequency, audio is outputted from front speakers only.

#When both the center speaker and the rear speaker are set to OFF in the speaker setting, you cannot switch to PLII.

#All audio functions are locked out when the di- rect control is on except VOLUME and PLII.

#When you select MUSIC in the PLII, you can select adjusting music mode.

#When playing other than the DVD disc, you cannot switch to DRC.

#When selecting FM as the source, you cannot switch to SLA.

#When you select TA :OFF in INITIAL, you can- not select FL.

#You cannot select AUTO EQ if auto TA and EQ has not been carried out. SET A-EQ is displayed.

#To return to the display of each source, press BAND/ESC.

#If you do not operate the DSP function except for TEST TONE, FL and PEQ within about 30 sec- onds, the display is automatically returned to the source display.

Using balance adjustment

You can change the fader/balance setting so that it can provide the ideal listening environ- ment in all occupied seats.

1Use MULTI-CONTROL to select FADER in the audio function menu.

Refer to Introduction of DSP adjustments on

the previous page.

# If the balance setting has been previously ad- justed, BALANCE will be displayed.

2Press aor bto adjust front/rear speak- er balance.

FADER :F25 to FADER :R25 is displayed as the front/rear speaker balance moves from front to rear.

#FADER : 0 is the proper setting when only two speakers are used.

3Press cor dto adjust left/right speaker balance.

BALANCE:L25 to BALANCE:R25 is displayed as the left/right speaker balance moves from left to right.

Using the position selector

One way to assure a more natural sound is to accurately position the stereo image, putting you right in the center of the sound field. The position selector function lets you automati- cally adjust the speaker output levels and in- serts a delay time to match the number and position of occupied seats. When used in con- junction with the SFC, the feature will make the sound image more natural and offer a pa- noramic sound that envelops you.

!When you make adjustments to the listen- ing position, the speaker outputs are auto- matically set for appropriate levels. You can tailor the levels more precisely referring to Adjusting the speaker output levels using a test tone or Adjusting the speaker output le- vels.

1Use MULTI-CONTROL to select POSI in the audio function menu.

Refer to Introduction of DSP adjustments on the previous page.

2Press c/d/a/bto select a listening po- sition.

Direction	Display	Position
c	F/L	Front seat left
d	F/R	Front seat right
a	FRT	Front seats
b	ALL	All seats

#To cancel the selected listening position, press the same button again.

Available accessories

En 53