3 TurnMULTI-CONTROL to select the lan-
guage.
EUROPEAN(European language)RUSSIAN
(Russianlanguage)
#Youcan also perform the same operations by
pressingaor b.
4 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been canceled before
determination,operation is settled.
Setting the display connectionon or off
Youcan use this unit with or without the dis-
play.When using this unit connected to the
display,you can turn the display connection
settingon or off. If you turn this function on,
thedetailed text information of the DVD,USB
andUSB-IPOD source appears on the display.
1 UseMULTI-CONTROL to select V.OUTin
theinitial setting menu.
Referto Adjusting initial settings on page 45.
2 PressMULTI-CONTROL to turn display
connectionon.
#Toturn display connection off, press
MULTI-CONTROLagain.
Note
Theoperation of this unit differs according to the
displayconnection on/off setting. The examples
areas follows:
!Playinga compressed audio file and display-
ingthe file name list mode
Whenthe display connection is set to on,
thefiles of the currently playing folder are
displayed.
Whenthe display connection is set to off,
thefile of the root folder is displayed.
!Playinga compressed audio file and pressing
DISP/BACK/SCRLin the file name list
Whenthe display connection is set to on,
thename of the currently playing file is se-
lected.
Whenthe display connection is set to off,
youcan return to the previous list (the
folderone level higher).
Correcting distorted sound
Onlywhen the multi-channel processor (DEQ-
P6600)is connected to this unit, you can oper-
atethis function.
Youcan minimize distortion that may be
causedby the equalizer curve settings.
Settingan equalizer level high can cause dis-
tortion.If high sound is crippled ordistorted,
tryswitching to LOW. Normally, leave the set-
tingat HIGH to ensure quality sound.
1 UseMULTI-CONTROL to select
DIGITALATTin the initial setting menu.
Referto Adjusting initial settings on page 45.
2 PressMULTI-CONTROL to display the
settingmode.
#PressDISP/BACK/SCRL to return to the pre-
viousdisplay.
3 TurnMULTI-CONTROL to switch the di-
gitalattenuator setting.
!HIGHHigh quality sound
!LOWMinimize distortion sound
#Youcan also perform the same operations by
pressingaor b.
4 PressMULTI-CONTROL to determine
theselection.
#Evenif the menu has been canceled before
determination,operation is settled.
Resetting the audio functions
Onlywhen the multi-channel processor (DEQ-
P6600)is connected to this unit, you can oper-
atethis function.
Youcan reset audio functions other than the
followingsettings.
!Volumesetting (refer to Adjusting the vo-
lumeon page 15)
!Listeningposition setting (refer to Using
theposition selector on page 53)
Operating this unit
En
48
Section
02