![](/images/new-backgrounds/1181952/181952103x1.webp)
Section
03Available accessories
Bluetooth adapter | Digital Signal Processor |
You can use this unit to control a Bluetooth adapter, which is sold separately.
For details concerning operation, refer to the Bluetooth adapter’s manuals. This section provides information on Bluetooth telephone/ audio operations with this unit which differs from that described in the Bluetooth adapter’s manual.
!In some countries,
!This unit is a head unit group 1 unit.
—But the selecting a function operation is the same as that of the head unit group 2.
—When a phone call ends, the system re- turns to the previous source.
—When a call comes in during sources other than Bluetooth telephone/audio source and the call is being carried on, you cannot use BAND/ESC to switch
Bluetooth telephone and Bluetooth audio.
You can use this unit to control
By carrying out the following settings/adjust- ments in the order shown, you can create a fi-
1Setting the speaker setting
2Using the position selector
3Auto TA and EQ
4Adjusting the time alignment
5Adjusting the speaker output levels using a test tone
6Selecting a
7Adjusting the speaker output levels
8Adjusting
Introduction of DSP adjustments
1Press
2Use
3Turn
FADER (balance
zer
# You can also use A.MENU on the remote con- trol to select an audio menu.
52
En