UNIT SETUP
FACTORYPRESETS
The following table shows you the factory settings for your unit:
Display | Setting |
Language | English |
LCD Contrast | 3 |
Area Code | No Setting |
After the adaptor is connected, the display will show as indicated below for setting. If you have previously applied power, press the review buttons simultaneously to enter Setup.
1.[SELECT LANGUAGE] appears on the display. Press the REVIEW UP ( ) to
select ESP/Spanish or REVIEW DOWN ( ) to select ENG/English. A check
mark designates the current selection. Then press the DELETE button to confirm the selection.
SELECTLANGUAGE | √ ENG ESP |
2.When [LCD CONTRAST] appears, press REVIEW UP (
) button to set the contrast darker, and then you can press REVIEW DOWN (
) button to set the
contrast back to the preset or lighter. The current selection will flash. Press DELETE to confirm and the screen will display the next option. The factory preset is 3.
1 2 3 4 5 LCD CONTRAST
7
