If [SET AREA CODE] appears prior to [PICKUP PHONE...]or dialing, it means you have not programmed the local area code. Please hang up the telephone and program the area code. To program the area code, press and hold the review buttons simulta- neously until you enter the setup.

1.If a local call (a telephone number with the same area code as you set) is reviewed and its 7-digit number displayed, press DIAL to dial the number displayed.

2.If a long distance call (a telephone number with a different area code than you set) is reviewed and its 10-digit number (3-digit area code + 7-digit telephone number) is displayed, press DIAL to dial the number displayed.

OPTIONSBUTTON

The OPTIONS button allows you to change the format of the displayed number The available format follows:

7-digit

7-digit telephone number.

10-digit

3-digit area code + 7-digit telephone number.

11-digit

long distance code 1 + 3-digit area code + 7digit telephone number.

If a local call, and its 7-digit number is displayed:

Pressing OPTIONS once will change it to a 10-digit format (your area code + 7-digit number).

Pressing OPTIONS twice will change it to an 11-digit number (1 + your area code + 7-digit telephone number).

Pressing OPTIONS three times will go back to the original 7-digit telephone number.

If a long distance call, and its 10-digit number is displayed,

Pressing OPTIONS once will change it to an 11-digit number (1+ 3-digit area code

+7-digit telephone number).

Pressing OPTIONS twice will remove the 3-digit area code and change to display only the 7-digit telephone number.

Pressing OPTIONS three times will go back to the original 10-digit number.

When the desired format of the telephone number is reached, press DIAL to dial the displayed number.

17

Page 20
Image 20
Cortelco 7150 instruction manual Optionsbutton