Cortelco 7150 instruction manual Receiving Calls, Reviewing Calls

RECEIVING CALLS

1.When the telephone is not in use and a new call is received, the display will show the NEW symbol, the phone number, the callers name, and time and date of the call for 20 seconds. The RPT (repeat) symbol will appear if the call has come in more than once.

1:23PM 1/2 CALL #01

123 456 7890 JOHN SMITH

2.After 20 seconds with no activity, the display will default to the Stand-By screen and remain on until another call is received or a button is pressed. This will show you the total number of calls stored and how many new calls have not been reviewed.

1:23PM 1/2

TOTAL: 01 NEW: 01

REVIEWING CALLS

1.When the NEW Call LED is flashing , you have new incoming calls. Next to the NEW symbol is the total number of new calls. Press the REVIEW UP ( ) or REVIEW DOWN ( ) button to review the incoming stored calls.

2.The NEW symbol attached to each call will be removed after you review the call.

3.If the NEW symbol is still flashing when the display goes back to the Stand-By screen, there are new calls that you have not yet reviewed.

4.The reviewed number can be stored into any of the auto memory buttons or keypad memory locations by pressing the MEMO button first (at least two sec onds), then press the MEMO button and the desired memory location.

5.When you have reached the end of the call records, the display will indicate [-END OF LIST- ] , confirming there are no more stored calls.

15