Minolta Di152 183 manual Scan Contrast Resolution Default TX Header OT-DIAL in Copy

10

Utility Mode – Fax Functions

3From the 10-Key Pad, press the key ([1] through [5]) for the “TX OPERATION” function that you wish to set.

The “TX OPERATION” functions are as follows:

1 SCAN CONTRAST

2 RESOLUTION

3 DEFAULT TX

4 HEADER

5 OT-DIAL IN COPY

Tip

If, at any time, you wish to quit setting a “TX OPERATION” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit.

To specify the default scanning contrast (“SCAN CONTRAST” function)

1Select the “TX OPERATION” menu.

 Refer to “To select the “TX OPERATION” menu” on page 10-35.

2Press the [1] key from the 10-Key Pad to select “SCAN CONTRAST”.

3Using the and keys, select

one of the five settings between “LIGHT” and “DARK”, and then press the [Yes] key.

The “TX OPERATION” menu appears again.

10-36 Di152f/Di183f