10

Utility Mode – Fax Functions

To program a one-touch dial key

1Select the “FAX REGISTRATION” menu.

 Refer to “To select the “FAX REGISTRATION” menu” on page 10-2.

2Press the [1] key from the 10-Key Pad to select “ONE-TOUCH DIAL”.

3Press the one-touch dial key that you wish to program.

4Using the 10-Key Pad, enter the fax number of the recipient.

 The fax number can contain a maximum of 30 digits.

For details on the characters

that can be entered, refer to p. 6-8.

To enter a sub-address, continue with step 5.

If a sub-address will not be entered, press the [Yes] key after entering the fax number, and then skip to step 7.

If “+” (one-touch dial key [22]) is added after the entered number, the programmed number can be used with combination dialing (p. 6-16).

If you wish to change the fax number, press the [No] key, and then enter the correct number.

For details on F codes (sub-address and SID), refer to “Using F codes” on page 7-25.

10-4

Di152f/Di183f

Page 223
Image 223
Minolta Di152 183 manual To program a one-touch dial key