Minolta Di152 183 manual To fax using combination dialing

6

Faxing

To fax using combination dialing

If one-touch dial keys or speed dial numbers have already been programmed with special prefix numbers, a fax number can be specified by recalling the prefix number from the one-touch dial key or speed dial number, and combining it with the fax number of a recipient either entered using the 10-Key Pad or recalled from a one-touch dial key or speed dial number.

For example, if the phone number and the extension number of a recipient are programmed in different one-touch dial keys, the fax number of the recipient can be specified by combining the two numbers.

A maximum of 30 digits (excluding “+”) can be dialed.

For details on programming combination dialing numbers, refer to page 10-3 and page 10-8.

1Press the [Fax] key to enter Fax mode.

2Load the document into the Automatic Document Feeder.

3If necessary, change the “Resolution” setting (p. 6-8).

4Press the one-touch dial key ([01] through [27]) programmed with the

desired combination dialing number.

or

Press the [Speed Dial] key, and then use the 10-Key Pad to enter the 3-digit speed dial number.

5Use the 10-Key Pad to enter the remainder of the fax number, and then press the [Start] key.

The remainder of the fax number can also be specified

using the one-touch dial keys or the speed dial numbers. If it is

specified using the one-touch dial keys, the machine

automatically starts scanning the document and sending the fax.

6-16 Di152f/Di183f