Minolta Di152 183 manual Before Making Copies or Faxing

3

Before Making Copies or Faxing

Note:

Load only copy paper of the specified type, size and amount, otherwise paper misfeeds or other problems may occur.

If paper with a size in metric (A4, A3, etc.) is loaded into a paper tray, select the appropriate setting for the “INCH/METRIC” function in the Utility mode. (p. 9-13)

If paper with a non-standard size is loaded into the 1st Tray, select the appropriate setting using the “TRAY1 PAPER” function in the Utility mode. (p. 9-14)

If paper with a non-standard size is loaded into the Manual Bypass Tray or Multiple Bypass Tray, select paper size setting “CUSTOM” before making copies, and then enter the corresponding paper size. (p. 4-19)

If cards, OHP transparencies, or postcards are loaded into the 1st Tray, select the appropriate setting using the “TRAY1 PAPER” function in the Utility mode. (p. 9-14)

If cards, OHP transparencies, or postcards are loaded into the Manual Bypass Tray or Multiple Bypass Tray, select the appropriate paper type before making copies. (p. 4-15 or p. 4-17)

If you do not want automatic paper size/paper source selection to be activated when recycled paper is loaded into a paper tray, select the appropriate setting using the “AUTO SELECT” function in the Utility mode. (p. 9-16)

If FLS paper with a size other than the default FLS size (8-1/4 ⋅ 13) is loaded, the setting must be changed. For details, contact your service representative.

Do not load paper of different sizes into the same paper tray.

3-40 Di152f/Di183f