Utility Mode – Copy Functions
9
9.2Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
From the “PAPER SOURCE SETUP” menu, various functions for the paper trays can be set.
“PAPER SOURCE SETUP” menu:
No. | PAPER SOURCE | Description |
| SETUP |
|
1 | INCH/METRIC | This function can be used to set the size measurement |
|
| system for the paper loaded in each tray. It can be used to |
|
| select whether paper measured in centimeters such as A4 |
|
| and B5 sizes (“METRIC”) or paper measured in inches |
|
| (“INCH”) such as Letter size is loaded. If no particular setting |
|
| is selected, the paper size is detected automatically. |
|
| • The manufacturer’s default setting is “INCH”. |
|
|
|
2 | TRAY1 PAPER | This function can be used to set the type of paper (plain |
|
| paper, OHP transparencies or postcards) loaded into the 1st |
|
| Tray, and whether the size is automatically detected (AUTO) |
|
| or specified (SIZE INPUT). |
|
| • The manufacturer’s default settings are “PLAIN” and |
|
| “AUTO”. |
|
|
|
3 | AUTO SELECT | Since all trays are normally available for automatic paper |
|
| selection, special paper loaded into a tray may be |
|
| automatically selected and wrongly copied onto. |
|
| For this reason, if this function is used to set the tray to |
|
| “DISABLE”, the paper in that tray will not be available for |
|
| automatic paper selection. In addition, it will not be available |
|
| for automatic paper source selection. |
|
| “ENABLE”: Paper and tray can be automatically selected. |
|
| “DISABLE” & “CONTINUOUS”: Paper cannot be |
|
| automatically selected, but tray can be automatically |
|
| selected. |
|
| “DISABLE” & “FIXED”: Paper and tray cannot be |
|
| automatically selected. |
|
| • The manufacturer’s default setting is “ENABLE”. |
|
|
|
Di152f/Di183f |
