Basic Copy Operations

4

To copy onto special paper (1st Tray)

If special paper, such as OHP transparencies, postcards or cards, are loaded into the 1st Tray, first set the “TRAY1 PAPER” function in the “PAPER SOURCE SETUP” menu of the Utility mode (“To specify the size of paper loaded into the 1st Tray (“TRAY1 PAPER” function)” on

page 9-14).

Depending on the paper type set for the “TRAY1 PAPER” function, the screen changes as shown below.

Postcards or cards

OHP transparencies

Di152f/Di183f

4-13

Page 96
Image 96
Minolta Di152 183 manual To copy onto special paper 1st Tray