Minolta Di152 183 manual When Copying Is Not Performed Correctly

13

Troubleshooting

13.2When Copying Is Not Performed Correctly

Symptom	Possible Cause	Remedy
Nothing appears on the	Only the [Start] key	The machine is in Energy
display.	indicator is lit up in green.	Saver mode (preheat
		mode).
		Press any key to cancel
		Energy Saver mode.
		(p. 3-25)
	The “AUTO SHUT OFF”	Set the Power Switch to “O”
	function was activated.	(p. 3-28).
The [Start] key indicator is not	A user (section) access	Enter the user (section)
lit up in green.	number has not been	access number according
	entered.	to the instructions in “To
		enter an access number” on
		page 3-27
Even though the [Start] key is	If the “Error” indicator on the	Follow the instructions in
pressed, no copies are made.	Control Panel is lit, an error	any messages that appear
	has occurred.	on the display.
	If the machine was just	The machine takes about
	turned on, it is still warming	30 seconds to warm up
	up.	after it is turned on.
The machine cannot be set to	The machine is in Interrupt	Press the [Interrupt] key to
Copy mode.	mode (the “Interrupt”	cancel Interrupt mode.
	indicator is lit).	(p. 3-26)
The machine cannot be turned	The power supply cord has	Plug the power supply cord
on.	been unplugged from the	into the electrical outlet.
	electrical outlet.
	The breaker for the	Close the breaker for the
	electrical circuit has been	electrical circuit.
	tripped.

13-4 Di152f/Di183f