Minolta Di152 183 manual Di152f/Di183f 12-19

Error Messages

12

Message			Cause	Remedy
SET ORIGINAL TO ADF			A document was not loaded	Load a document into the
			into the Automatic Document	Automatic Document Feeder.
			Feeder before beginning a	Securely close the Automatic
			copy function (such as, “2in1”	Document Feeder.
			copying or “Mixed Orig.”
			copying) that uses the
			Automatic Document Feeder.
			Otherwise, the Automatic
			Document Feeder is lifted up.
REMOVE PAPER			When interrupting a copy job	Remove the document from
			to perform a different copy	the Automatic Document
			operation other than the	Feeder.
			“Book Separation” function,
			the document for the
			interrupted copy job was left
			in the Automatic Document
			Feeder.
TEXT	⋅1.0	1	(While specifying copy	Either load paper of the
ä[A]ü#XXX:EMPTY			settings)	specified size into the
			The selected paper tray has	specified paper tray, or press
			run out of paper.	the [Paper] key and select a
			“#” indicates the paper tray,	different paper size.
			and “XXX” indicates the
			paper size.
NO SUITABLE PAPER			• While copying, the size of	Either load paper of the
	(Flashing alternately)		the paper in the selected	specified size, or press the
			paper tray has changed.	[Paper] key and select a
LOAD PAPER (#XXX)			• While copying documents	different paper size.
			with mixed sizes using the
			“Auto Paper” function,
			paper of a suitable size
			could not be found.
			“#” indicates the paper
			tray, and “XXX” indicates
			the paper size.
APS SIZE ERROR			While copying using the	Either load paper of a
			“Auto Paper” function, paper	suitable size, or press the
			of a suitable size could not be	[Paper] key and select a
			found.	different paper size.
AMS SIZE ERROR			While copying using the	Either load paper of a
			“Auto Size” function, the	suitable size, or use the
			combination of the document	and	keys to specify the
			and paper sizes caused the	zoom ratio.
			zoom ratio to exceed the
			range between ⋅0.5 and
			⋅2.0.
PAPER SIZE ERROR			The paper loaded in the	Pull open the paper tray with
	(Flashing alternately)		paper tray caused a size	the size error, and then close
			error.	it again.
RESET PAPER (#XXX)			“#” indicates the paper tray,	Check if a custom paper size
			and “XXX” indicates the	has been entered, and
			paper size.	correct the paper size using
				the appropriate Utility mode
				function.

Di152f/Di183f 12-19