Minolta Di152 183 manual ? Have you entered the number correctly?

Faxing

6

To fax by entering the fax number directly using the 10-Key Pad

1Press the [Fax] key to enter Fax mode.

2Load the document into the Automatic Document Feeder.

3If necessary, change the “Resolution” setting (p. 6-8).

4Using the 10-Key Pad, enter the fax number of the recipient.

 F codes (sub-address and SID) can also be entered. Refer to “Using F codes” on page 7-25.

?Have you entered the number correctly?

The fax number can contain a maximum of 30 digits.

The keys that can be used to enter the fax number are: the number keys (0 through 9), , #, -, Space, and Pause

If the [Redial/Pause] key is pressed while entering the fax number, a 3-second pause is added. A pause appears as “P” in the display.

If you wish to change the fax number, press the [No] key, and then enter the correct number.

If the machine is connected to a PBX line and the outside line access number has been specified in the communication settings (p. 3-35), enter “#” to dial the outside line access number automatically.

5Press the [Start] key to begin scanning and sending the fax.

Di152f/Di183f 6-11