Minolta Di152 183 manual 13-2 Di152f/Di183f

13

Troubleshooting

Symptom	Possible Cause	Remedy
There are streaks through the	The Original Glass is dirty.	Wipe the glass with a soft
copy.		dry cloth. (p. 14-9)
	The document pad is dirty.	Clean the document pad
		with a soft cloth dampened
		with a mild detergent.
		(p. 14-9)
	The original is highly	Place a blank sheet of
	translucent, such as diazo	paper over the document.
	photosensitive paper or	(p. 4-6)
	OHP transparencies.
There are specks throughout
	A double-sided document is	If a thin double-sided
the entire copy.
	being copied.	document is being copied,
		the information on the back
		side may be reproduced in
		the copy. Use the Auto/
		Photo key	to select a
		lighter density for the
		background. (p. 4-26)
The edge of the copy is dirty.	The document pad is dirty.	Clean the document pad
		with a soft cloth dampened
		with a mild detergent.
		(p. 14-9)
	The selected paper size is	Select a copy paper size
	larger than the document	that is the same as the size
	(with a zoom setting of	of the document. (p. 4-11)
	⋅1.00).	Otherwise, select the “Auto
		Size” function to enlarge the
		copy to the selected paper
		size. (p. 4-21)
	The orientation of the	Select a copy paper size
	document is different from	that is the same as the size
	the orientation of the copy	of the document.
	(with a zoom setting of	Otherwise, select a copy
	⋅1.00).	orientation that is the same
		as the orientation of the
		document.
	The copy was reduced to a	Select a zoom ratio that
	size smaller than the copy	adjusts the copy size to the
	(with a reduced zoom ratio).	size of the selected paper.
		(p. 4-22)
		Otherwise, select the “Auto
		Size” function to reduce the
		copy to the selected paper
		size. (p. 4-21)

13-2 Di152f/Di183f