Minolta Di152 183 Specifying Communication Settings COMM.SETTING Menu, Comm.Setting, Tone/Pulse

10

Utility Mode – Fax Functions

10.4Specifying Communication Settings (“COMM.SETTING” Menu)

From the “COMM.SETTING” menu, various functions are available for specifying communication settings.

“COMM.SETTING” menu:

No.	COMM.SETTING	Characteristic/Description
1	TONE/PULSE	This function can be used to specify the dialing system. If this
		function is not correctly set to the type of dialing system used,
		faxes cannot be sent. Select the correct setting after
		checking which type of dialing system is used by your
		telephone line.
		For details on setting this function, refer to “Specifying the
		Phone Dialing System” on page 3-34.
2	LINE MONITOR	This function can be used to set the volume when monitoring
		communication to “HIGH”, “LOW” or “OFF”.
		• The manufacturer’s default setting is “LOW”.
3	PSTN/PBX	This function can be used to set whether the connected
		telephone wiring is a public switched telephone network
		(PSTN) or a private branch exchange (PBX).
		For a PBX system, the outside line access number (or
		extension number) must be specified.

For details on setting the “TONE/PULSE” and “PSTN/PBX” functions, refer to “Specifying the Phone Dialing System” on page 3-34 and “Specifying the Phone Wiring System” on page 3-35.

10-48 Di152f/Di183f