Minolta Di152 183 manual ? Do you know how large of an area is erased?

Advanced Copy Operations

5

Setting the “Erase” Function

To make copies using an “Erase” setting

1Load the document to be copied.

 Refer to “Loading the Document” on page 4-1.

2Press the [Erase] key until the

indicator for the desired “Erase” setting lights up.

?Do you know how large of an area is erased?

The width of the erased area for

the “Left”, “Upper” and “Frame” settings can be set between 1/4 inch (5 mm) and 3/4 inch

(20 mm), in 1 mm (Approx. 1/16 inch) increments. The default setting is 1/2 inch (10 mm).

The width of the erased area for the “Center” setting is fixed at 1/2 inch (10 mm).

The width of the erased area for the “Left”, “Upper” and “Frame” settings can be changed using the “ERASE SETTING” function in the Utility mode (p. 9-36).

3If necessary, specify any other copy settings.

4Using the 10-Key Pad, enter the desired number of copies, and then press the [Start] key.

Di152f/Di183f 5-11