Minolta Di152 183 Copy Setting, Paper Priority, Density Priority, Density Levela, Density Levelm

Utility Mode – Copy Functions

9

9.5Specifying Copy Settings (“COPY SETTING 1” & “COPY SETTING 2” Menus)

The settings that are automatically selected when the machine is turned off or the [Panel Reset] key is pressed are called the “default settings”. From the “COPY SETTING 1” menu, the default settings for various functions can be specified.

“COPY SETTING 1” menu:

No.	COPY SETTING 1	Description
1	PAPER PRIORITY	This function can be used to specify the paper size or tray
		that should be given priority when the “Auto” zoom setting is
		selected.
		• The manufacturer’s default setting is “Letter C”.
2	DENSITY PRIORITY	This function can be used to set the density to “AUTO”,
		“MANUAL” or “PHOTO” when the machine is turned off or
		the [Panel Reset] key is pressed.
		• The manufacturer’s default setting is “AUTO”.
3	DENSITY LEVEL(A)	This function can be used to set the density level of the
		“AUTO” density setting to one of the three settings between
		“LIGHT” and “DARK”.
		• The manufacturer’s default setting is the middle level.
4	DENSITY LEVEL(M)	This function can be used to set the density level of the
		manual density setting to one of the five settings between
		“LIGHT” and “DARK”.
		• The manufacturer’s default setting is the middle level.
5	BINDING POS.	This function can be used to set whether the first page of a
		book to be scanned is on the left (left-bound) or on the right
		(right-bound).
		• The manufacturer’s default setting is “LEFT”.
6	MARGIN SETTING	This function can be used to specify between 0 inch and 3/
		4 inch (20 mm), (in units of Approx. 1/16 inch (1 mm)) the
		width of the binding area (margin) when copying documents
		to be bound.
		• The manufacturer’s default setting is 1/2 inch (10 mm).
7	ERASE SETTING	This function can be used to specify between 1/4 inch (5 mm)
		and 3/4 inch (20 mm), (in units of Approx. 1/16 inch (1 mm))
		the width that is erased when making copies with the “Erase”
		function set to “Left”, “Upper” and “Frame”.
		• The manufacturer’s default setting for the “Left”, “Upper”
		and “Frame” erase settings is 1/2 inch (10 mm).

Di152f/Di183f 9-31