
9
Utility Mode – Copy Functions
To specify the size of paper loaded into the 1st Tray (“TRAY1 PAPER” function)
1Select the “PAPER SOURCE SETUP” menu.
Refer to “To select the “PAPER SOURCE SETUP” menu” on page
2Press the [2] key from the
3Using the and
keys, select “PLAIN”, “OHP” or “CARD”, and
then press the [Yes] key.
4Using the
and
keys, select either “AUTO” or “SIZE INPUT”, and
then press the [Yes] key.
If “AUTO” was selected, the
“PAPER SOURCE SETUP” menu appears again.
If “SIZE INPUT” was selected, a screen appears, allowing you to specify the paper size.
5Using the
The paper length can be set between
However, when the length is set between
If you wish to correct the setting, press the [No] key, and then enter the new number.
Di152f/Di183f |