Minolta Di152 183 manual To select the Copy Setting 2 menu, Tip

Utility Mode – Copy Functions

9

4Using the 10-Key Pad, enter the width of the area to be erased, and then press the [Yes] key.

The width of the area to be erased can be set between 1/4 inch (5 mm) and 3/4 inch (20 mm).

If you wish to correct the setting, press the [No] key, and then enter the new number.

The “COPY SETTING 1” menu appears again.

To select the “COPY SETTING 2” menu

1Press the [Utility] key.

2Press the key 5 times to select “COPY SETTING 2”.

3From the 10-Key Pad, press the key ([1] through [5]) for the “COPY SETTING 2” function that you wish to set.

The “COPY SETTING 2” functions are as follows:

1 MIXED ORIGINAL

2 COPY PRIORITY

3 OUTPUT PRIORITY

4 4IN1 COPY ORDER

5 CRISSCROSS MODE

Tip

If, at any time, you wish to quit setting a “COPY SETTING 2” function, press the [No] key. When the message “STOP SETTING?” appears, press the [Yes] key to quit.

Di152f/Di183f 9-37