Kodak DX6440 manual Setting the Date and Time, Setting the Date & Time, First Time

Chapter 1

Setting the Date and Time

Setting the Date & Time, First Time

The Date & Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended time.

	1	SET DATE & TIME is highlighted. Press the
		OK button.
		(Select Cancel to set the date and time at a
		later time.)
		The Date & Time screen appears.
OK	2	Go to step 4 below, Setting the Date & Time,
		Anytime.

Setting the Date & Time, Anytime

	1	Turn on the camera. Press the Menu button.
	2	Press	to highlight Setup, then press
		the OK button.
	3	Press	to highlight Date & Time, then
		press the OK button.
		The date format is YYYY/MM/DD. The time
Joystick/OK	Menu	is displayed in a 24-hour format.
4 Press	to adjust the date and time. Press			to advance to the
next setting.

5When finished, press the OK button.

6Press the Menu button to exit the menu. The setting remains until you change it.

NOTE: Depending on your computer operating system, Kodak EasyShare software may allow your computer to automatically update the camera clock when you connect the camera. See the Kodak EasyShare software Help for details.

6