Kodak DX6440 manual Accessing the correct Setting Picture or Storage location, A bright light

Chapter 10

Problem	Cause	Solution
In Review mode,	The camera may not be	Check the picture storage location
you do not see a	accessing the correct	setting (page 10).
picture (or the	storage location.
expected picture)
on the camera
screen.
Picture is too	Flash is not on.	Turn on the flash (page 24).
dark.
	The subject is too far	Move so there is no more than
	away for the flash to	16.7 ft (5.1 m) between the
	have an effect.	camera and the subject; 8.5 ft
		(2.6 m) in Telephoto.
	The subject is in front	Use Fill flash (page 24) or change
	of a bright light	your position so light is not behind
	(backlit).	the subject.
	Not enough light.	In Landscape mode, use Long
		Time Exposure (page 35).
		In Landscape, Close-up, or PAS
		modes, set ISO to 400 (page 34).
		Use PAS mode to change the
		shutter speed (page 17).
	Auto exposure was not	To take the best possible pictures,
	achieved.	press the Shutter button
		half-way and hold. When the
		ready light glows green, press the
		Shutter button the rest of the
		way down to take the picture.

87