Chapter 9

Installing the Custom Camera Insert

A universal insert is pre-installed in the camera dock. It allows all Kodak EasyShare CX/DX6000 series and LS600 series cameras to use the camera dock.

A custom insert is included with your camera. It provides a perfect fit for your Kodak EasyShare DX6340 zoom digital camera.

Remove the Universal Insert

1Place your thumbs against the front of the universal insert. Press in and lift.

2Lift the side edge of the insert, then remove

the insert from the dock.

3 Save the universal insert as a spare.

Install the Custom Insert

Cutout

Connector

1Position the custom insert so the cutout lines up with the camera dock connector.

2Fit the insert into the groove in the dock. Snap it into place.

NOTE: To order a custom insert for your camera, visit www.kodak.com/go/dx6440accessories.

76

Page 88
Image 88
Kodak DX6440 manual Installing the Custom Camera Insert, Remove the Universal Insert, Install the Custom Insert