Chapter 4

Running a Continuous Slide Show Loop

When you turn on Loop, the slide show is continuously repeated.

1On the Slide Show menu, press to highlight Loop, then press the OK button.

2Press to highlight On, then press the OK button.

When you start a slide show, it repeats until you cancel it by pressing the OK button or until battery power is exhausted. The Loop setting remains until you change it.

Displaying Pictures/Videos on a Television

You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)

NOTE: Make sure the Video Out setting (NTSC or PAL) is correct (page 67).

Audio/video 1 Connect the audio/video cable (included)

cable from the camera video-out port to the television video-in port (yellow) and

audio-in port (white). Refer to your television user’s guide for details.

The camera screen turns off; the television screen acts as the camera display.

2Review pictures and videos on the television screen.

NOTE: The slide show stops if you connect or disconnect the cable while the slide show is running.

56

Page 68
Image 68
Kodak DX6440 manual Running a Continuous Slide Show Loop, Press to highlight On, then press the OK button