Kodak DX6440 manual Tips, Safety, Maintenance, White Balance Auto

	Chapter 12
Feature	Factory Setting
Set Album (Still)	Off
Shutter Sound	On
Slide Show Interval	5 seconds
Slide Show Loop	Off
Storage Location	Auto
Video Date Display	None
Video Out	NTSC
White Balance	Auto

Upgrading Your Software and Firmware

Download the latest versions of the software included on the Kodak EasyShare software CD and the camera firmware (the software that runs on the camera). Visit www.kodak.com/go/dx6440downloads.

Tips, Safety, Maintenance

!Always follow basic safety precautions. Refer to the “Important Safety Instructions” booklet packed with your camera.

!Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the camera.

!If the camera has been subjected to inclement weather or you suspect water has gotten inside the camera, turn off the camera and remove the battery and card. Allow all components to air-dry for at least 24 hours before using the camera again. If this does not resolve the problem, contact customer support (page 100).

!Clean the lens and camera screen:

1 Blow gently on the lens or camera screen to remove dust and dirt.

107