Minolta Di152 183 manual 37 36

3

Before Making Copies or Faxing

	41			40	39	38	37 36 35
							34
							33
							32
							31
	25	26	27	28		29	30
No.	Part Name				Function

25	[Auto/Photo] key, and		• Used to specify the scanning density of copies.
	keys		• Used to specify the selection at the left or right in
			setting screens.
26	[Paper] key		Used to select the size of the paper to be printed on.
27	[Zoom] key,	and	• Used to select a preset enlargement or reduction
	keys		ratio.
			• With each press, a zoom ratio between ⋅ 0.50 and
			⋅ 2.00 in 0.01 increments is selected.
			• Used to specify the selection above or below in
			setting screens and menus.
28	[Auto Paper/Auto Size]		Used to select between the “Auto Paper” or the “Auto
	key		Size” function.
29	[Start] key		• Starts copying.

•Starts a fax transmission.

•Queues a copy job if pressed while the machine is warming up. (p. 3-25)

•The indicator lights up in green to indicate that the machine is ready to start copying or it lights up in orange to indicate that the machine is not ready to start copying.

30	[Stop] key	• Stops the multi-page copy operation.
		• Stops the fax transmission or reception.
31	[Panel Reset] key	• Cancels all copy functions and returns them to their
		default settings (Deletes all queued jobs). (p. 3-24)
		• Cancels all fax functions and returns them to their
		default settings.
		*Queued timer transmission faxes and documents
		received during memory reception are not cancelled.
32	[Interrupt] key	Press to enter Interrupt mode. The indicator lights up in
		green to indicate that the machine is in Interrupt mode.
		Press again to cancel Interrupt mode and return to the
		mode before Interrupt mode was entered. (p. 3-26)

3-20 Di152f/Di183f