6
Faxing
6.5Receiving
Receiving Automatically/Manually
If the machine is set to receive faxes automatically, no further operations are required.
If the machine is set to receive faxes manually, the telephone receiver must be picked up in order to receive the fax.
For details on changing the reception method, refer to “To set the “RX MODE” function” on page
Receiving
While receiving:
The mark indicating that a fax is being received appears in the
display.
Once reception is finished, a beep is sounded.
For details on checking the transmission result, refer to page
If there is no more paper:
If the “AUTO SELECT” paper supply setting is selected, the paper tray containing paper of the same size is automatically selected, and the fax is printed. If there is no tray containing paper of the same size, the following occurs.
The message “PAPER EMPTY” appears in the display.
The received fax is stored in the memory, and when paper of the appropriate size is loaded, the fax is automatically printed.
If the entire fax does not fit in the memory, the remainder of the document is not received.
If the memory becomes full, no more documents can be received.
Di152f/Di183f |
