Nothing happens when memory card is inserted

Check memory card placement

Check memory card type

Memory card may be damaged

A digital camera may be connected

USB cable may not be connected

See “Inserting a memory card” on page 53 to determine which slot accommodates your memory card and to see instructions on how to insert it.

Make sure that the type of memory card you are using can be used in the printer. See “Inserting a memory card” on page 53.

Check that there is no obvious damage to the memory card.

Disconnect the PictBridge-enabled digital camera from the printer.

1Check the USB cable for any obvious damage.

2Firmly plug the square end of the USB cable into the back of the printer.

3Firmly plug the rectangular end of the USB cable into the USB port of the computer.

The USB port is marked with the USB symbol .

Error messages

Alignment problem

(tape on cartridge)

Alignment problem

(used paper)

Black Ink Low / Color Ink Low / Photo Ink Low

1Remove the print cartridge.

2Make sure the sticker and tape have been removed.

1

2

3Reinsert the cartridge.

4Press to align the cartridge.

For more information, see “Aligning print cartridges” on page 89.

Load only plain, unmarked paper for aligning the cartridge.

The printer will read any markings on used paper, which could cause the alignment error message to appear.

1Check the indicated ink level or levels, and install a new cartridge or cartridges, if necessary. Low ink warnings occur when a cartridge is 25% full, 15% full, and 10% full.

To order supplies, see “Ordering supplies” on page 91.

2Press to continue.

110

Page 110
Image 110
Lexmark 5400 manual Error messages, Nothing happens when memory card is inserted, 110