Lexmark 5400 manual Phone Line Busy, Phone Line Error

Models: 5400

1 127
Download 127 pages 54.43 Kb
Page 115
Image 115

Phone Line Busy

(change redial settings)

Phone Line Busy

(schedule to resend fax at a later time)

Phone Line Error

(digital phone service checklist)

Phone Line Error

(check phone line and cable connections)

The printer automatically redials three times at 3-minute intervals. You can change the default settings to redial up to five times at intervals up to 8 minutes.

To change the redial settings:

1From the control panel, press Fax Mode.

2Press .

3Press or repeatedly until Fax Setup appears.

4Press .

5Press or repeatedly until Dialing and Sending appears.

6Press .

7Press .

8To change the number of times the printer will redial:

aPress or repeatedly until Redial Attempts appears.

bPress .

cPress or repeatedly until the setting you want appears.

dPress .

9To change the length of time between redials:

aPress or repeatedly until Redial Time appears.

bPress .

cPress or repeatedly until the setting you want appears.

dPress .

See “Sending a broadcast fax at a scheduled time” on page 71.

The fax modem is an analog device. Certain devices can be connected to the printer so that digital telephone services can be used.

If you are using an ISDN telephone service, connect the printer to an analog telephone port (an R-interface port) on an ISDN terminal adapter. For more information and to request an R-interface port, contact your ISDN provider.

If you are using DSL, connect to a DSL filter or router that will support analog use. For more information, contact your DSL provider.

If you are using a PBX telephone service, make sure you are connecting to an analog connection on the PBX. If none exists, consider installing an analog telephone line for the fax machine. For more information on faxing when using a PBX telephone service, see “Setting up to fax while behind a PBX” on page 77.

If the telephone line is being used by another device, wait until the other device is finished before sending the fax.

Make sure cable connections for the following hardware are secure, if applicable:

Power supply

Telephone

Handset

Answering machine

115

Page 115
Image 115
Lexmark 5400 manual Phone Line Busy, Phone Line Error