>Press the OK key to proceed to the selection mode.
The programme selected will be marked on the right hand side with a small cross, and the menu display will become transparent, with the picture visible in the backgro- und.
>Use the arrow up/down keys repeatedly to mark additional programmes you wish to include in the list.
>When you have completed marking programmes in this way, press the green func- tion key in order to accept the marked programmes into the programme list selected.
>If you wish, you can proceed to select a further user list in order to add programmes from the list displayed into this user list.
7.1.3 Deleting programmes
a) Deleting from user list
If you use the above procedure to mark those programmes with a cross that are already in the user list, i.e. have a check mark on the
b) Deleting from main memory list
By pressing the red key (Delete) you can delete programmes from the main memory list, after confirming the instruction.
>Mark the programmes to be deleted as described above.
>Press the red (Delete) function key.
The query “Really delete program(s)?” will be displayed.
>Press the arrow left/right keys to select Yes or No.
>Confirm entry by pressing OK.
7.1.4 Sorting programmes
In order to sort the programmes in a user programme list in the order most convenient to you, proceed as follows:
>Call up a programme list display by pressinf the OK key.
>Use the green function key to select the programme list you wish to change/sort (Point 7.1.1).
>Press the blue function key (edit mode).
>Use the arrow up/down keys to mark the programme you wish to place at a diffe- rent position in the list.
>Press the yellow function key to select the function Sort.
A double arrow will be displayed next to the programme selected.
>You can now use either the arrow up/down keys or the numeric keys to place the programme at any desired position in the programme list.
>Press the yellow function key. The programme will be stored at the new position.
>When you have completed configuring the programme list in this manner according to your preferences, press the Back key twice to return to normal operation.
7.1.5 Blocking programme access (Parental control feature)
You have the option of blocking access to any programme. A blocked programme can only be viewed on the screen once you have entered your personal PIN number, after selecting the programme. Once this number has been entered, access remains unblocked until the receiver is switched off again (standby).
In order to block access to a programme, proceed as follows:
> Call up a programme list by pressing the OK key.
25
