TechniSat 1 Audio decoding, Memory capacity, Audio Parameters Input analogue, Output analogue

Active image area	720 Pixel x 576 lines
Image formatt	4 : 3 / 16 : 9
Image material 16:9	Automatic adjustment for 16:9 TV sets (via SCART)
	Letterbox Filterung for 4:3 TV sets

Audio decoding:

Audio compression	MPEG-1 & MPEG-2 Layer I and II
Audio Mode	Dual (main/sub), Stereo
Sampling frequencies	32 kHz, 44.1 kHz, 48 kHz,

Memory capacity:

FLASH memory	0,5Mbytes
SDRAM (CPU)	2 MBytes
SDRAM (CPU)	2 MBytes
EEPROM	1 kByte

Audio Parameters:

Input analogue:

Input levels L/R	0,5 V r.m.s. (nominal)
Input impedance	> 40 kOhm

Output analogue:

Output levelsl L/R	0,5 V r.m.s. (nominal)
Output impedance	600 Ohm
THD	> 60 dB (1 kHz)
Crossover	< - 65 dB
Initial volume	Memorizes last set value

Video Parameters:

Input:

Input level FBAS	1 Vs-s +/- 0.3 dB into 1 kOhm
Input level RED	0,7 Vs-s +/- 0.1Vp-p into 75 Ohm
Input level GREEN	0,7 Vs-s +/- 0.1Vp-p into 75 Ohm
Input level BLUE	0,7 Vs-s +/- 0.1Vp-p into 75 Ohm

Video/Tele text

Tele text filtering	corresponding to ETS 300 472 standard
Reading in tele text files	(FBAS) corresponding to ITU-R BT.653-2 lines: 6-22 and 320-335
TV-SCART:

Output: switchable FBAS or RGB r

VCR-SCART:

Eingang:	FBAS oder RGB
Output:	FBAS

Serial Interface RS 232:

Type	RS 232, bi-directional
Bitrate	38,4 kBit/s
Connecting plug	D-SUB 9 pin plug
Function	Updating of operational software

34