Setup Guide (cont.)
After setting the start hour for “Day”, press ENTER and the “Star&Moon” icon |
|
will blink. Press ENTER and set the hour to define the start of “Night”. During |
|
| |
the Night, photos and videos will be taken using the infrared LED lamp array to |
|
light the scene. This allows you to take night photos without startling animals or | g |
revealing the camera position, as infrared light is invisible to the eye. During the | |
time period you defined as “Night”, an internal filter which blocks infrared light |
|
from reaching the digital image sensor is automatically deactivated, so that the |
|
IR LED lamps can work. During the day, the infrared filter is reactivated, so that |
|
only normal visible light strikes the sensor and affects the image. After setting the start hour for Day and Night, press
ENTER. |
| |
7. The “key” icon will flash next (h), press ENTER and enter any four digit password |
| |
| ||
of your choice (to keep using the default “0000”, just press ENTER 4 times) by | h | |
using the UP/DOWN buttons to change each digit and using ENTER to step to the | ||
next digit (i). When finished, press ENTER if you want to return to the date/time |
| |
setup menu, or press and hold the MENU button at any time to exit all setup menus |
| |
and return to normal operation. |
|
|
|
| |
8. In normal operating mode, the display will only show the still photo or movie |
| i |
clip icon in the lower left corner, the day or night mode icon, an SD card icon on |
| |
the lower right, and one or more digits that indicate how many photo or movie files |
|
|
have been stored on the card. To test the camera operation, wave your hand in front |
|
|
|
| |
of the lens and PIR (passive infrared/motion) detector, while looking at the LCD |
| |
display. Every time an “event” is detected, the display will indicate “Plr”, “EVNT”, “rECd” in turn, and the event is recorded on the SD card as a new line in a text file, including the date and time of the event. As long as events are being detected, a new still photo or movie clip (as set in the menu) will be recorded every 30 seconds, indicated on the display by “Plr”, “SnAP”, then “SAVE”. Note: for movie clips, the display will stay on “SnAP” for the 14 sec duration of each movie.
10
119204+119305 Trail Sentry | 3/3/08 11:51:15 PM |