BenQ X600 user manual Movie mode, Returning the shooting functions to the default settings

BenQ DC 5530 User’s Manual

1.In [Green Button] menu, use the four-way controller (S T) to select [Fn Setting].

2.Press the OK button.

The Fn Setting screen appears.

3.Use the four-way controller (S T) to select a key you want to assign a function to.

4.Press the four-way controller (X). The pull-down menu appears.

5.Use the four-way controller (S T) to select a function you want to assign.

6.Press the OK button.

7.Press the shutter release button halfway. The camera is ready to take the picture.

• This function is activated only when assigning the Fn Setting to the Green Button.

•You can assign only one function to each key.

3.4.8 Returning the shooting functions to the default settings

This function lets you return all the shooting function settings to the defaults.

All the items on the [Rec. Mode] menu and the settings for flash, drive, focus, and displayed information are reset.

For details on Rec. Mode menu, refer to 3.7.1 “[Rec. Mode] menu” on page 26.

1.	Press the Green Button in Capture mode.
	The [Initialize Rec. Mode?] message appears.	Initialize Rec. Mode?
2.	Use the four-way controller (S T) to select
	[Initialize].	Initialize
3.	Press the OK button.	Cancel
	All the shooting function settings return to the	OK OK
	defaults and the camera returns to Capture mode.

• This function cannot be used when assigning a func- tion other than Initialize Rec. Mode to the Green Button.

3.5Movie mode

This mode enables you to record movies and sound.

1.	Press the four-way controller (T) in Capture mode.
				Movie
	The mode palette appears.
2.	Use the four-way controller (S T W X) to select
		(Movie mode).
3.	Press the OK button.
	The following shooting information appears on the
	LCD monitor and the camera is ready to take movies.
4.	Press the shutter release button. Shooting starts.		MENU		OK OK
5.	Press the shutter release button. Shooting ends.

English

Using the DC X600 13