BenQ X600 user manual Setting the date and time

English

BenQ DC 5530 User’s Manual

An SD memory card can be used with this camera. Captured images are recorded on the SD memory card if a card is inserted or in the built-in memory if no card is inserted.

• Make sure that the camera is turned off before inserting or removing the SD memory card.

•Be sure to format unused cards or cards that have been used on another camera.

1.Open the battery/SD memory card cover.

Slide the battery/SD memory card cover in the direction indicated by the arrow 1 and flip the cover open 2.

2.Insert an SD memory card so the label (the side with the S symbol) is facing toward the LCD monitor and push the card in until it clicks.

3.Close the battery/SD memory card cover.

To remove the card, eject the card by pressing it in the direction indicated by the arrow and pull it out.

• The number of recordable images varies depending on the capacity of the SD memory card or built-in memory and the selected image size and quality.

•Be sure to format the SD memory card with this camera before the initial use.

•To prevent valuable data from being accidentally

erased from an SD memory card, you can slide the write-protect tab (on the side of the SD memory card) to “LOCK”.

•To save, edit, or erase data on an SD memory card,

you must unlock the card.

•While formatting the internal memory, do not insert a

memory card into the camera. Otherwise, the memory card is formatted instead of the camera’s internal memory.

•Formatting is an irreversible action and data cannot be recovered at a later time. Back up your data before formatting.

•An SD memory card having read or write problems may not be properly formatted.

2.4Setting the date and time

Before using your camera for the first time, please set the date and time.

4 Preparing Your DC X600 for Use