English
BenQ DC 5530 User’s Manual
PREPARING YOUR DC X600 FOR USE
2.1Installing and removing the battery
1 | 3 | Battery |
2 | ||
|
| |
1 |
| 2 |
|
| |
|
| Battery lock |
|
| lever |
2.1.1 Installing the battery
1.Open the battery/SD memory card cover.
Slide the battery/SD memory card cover in the direction indicated by the arrow 1 and flip the cover open 2.
2.Insert the battery with the S symbol facing toward the LCD monitor while using the side of the battery to press the battery lock lever in the direction indicated by the arrow.
3.Close the battery/SD memory card cover.
2.1.2 Removing the battery
1.Open the battery/SD memory card cover.
2.Release the battery by using your finger to press the battery lock lever in the same direction as when you inserted the battery.
3.Pull the battery out.
• Insert the battery correctly. If the battery is incorrectly oriented, it may cause a malfunc- tion.
•Do not remove the battery when the camera is turned on.
•If you do not intend to use the camera for a long time, remove the battery.
•If the camera is left without the battery for a long time, the date will be reset.
2 Preparing Your DC X600 for Use