Aluratek ADVC01F Operating Instructions, Specifications, Connect to TV, Connect to Computer

Page 2

Operating Instructions

STEP 1. Installing the Battery:

1.Open the battery door.

2.Insert (2) AA alkaline batteries into the camera.

3.Power on / off by holding for 3 seconds.

STEP 2. Inserting a Memory Card (not included)

ADVC01F has a very small amount (16MB) of built-in memory. It is highly recom- mended to increase the memory capacity with a SD or SDHC memory card (not included). Follow the instructions below to insert the optional SD / SDHC memory card into the camera.

1.Turn off the camera.

2.Insert the SD card into the camera.

Note: There is only one correct direction to insert the SD memory card into the slot. Do not force the card into the slot, or else it may damage both the camera and the SD memory card.

Note: Most memory cards come pre formatted. If your memory card is not formatted, please follow these simple procedures.

Formatting the Memory or SD Card:

Warning: Formatting will erase everything on the card

1.Press and hold Mode button to enter setting menu;

2.Select Setup mode by navigation keys and press REC to confirm;

3.Select Format by navigation keys and press REC to confirm;

4.Press REC to format the card or memory.

Setting the Resolution:

ADVC01F can be set to different resolutions.

1.Press and hold Mode button to enter setting menu;

2.Select Resolution by navigation keys and press REC to confirm;

3.Different resolutions will be displayed. Select the desired resolution by navigation keys and press REC to confirm the selection.

STEP 3. Taking Video or Photographs:

1.Power on ADVC01F.

2.Press Mode to set ADVC01F to photo mode () or video mode ( ).

3.Depending on the distance to the object being photographed, use Macro switch to adjust the distance. Select the flower symbol ( ) to take a close up phot graph (11cm –18cm). To take video or photograph of surroundings or people (0.5m - infinity), set the Macro switch to Normal mode ( ).

4.Use the LCD screen to aim the object you wish to take video or photograph.

5.Press REC button.

Caution: 1) Taking picture for fast-moving object is not recommended.

2)Image may be distorted when taking picture in a moving vehicle. Zoom IN and OUT:

ADVC01F has 8X zoom.

Zoom in or out by pressing the ▲or ▼ button, a number will appear on the display. 8.0x is the maximum zoom.

STEP 4. Playback Photographs / Videos Clips :

Photographs Playback :

1.Press Mode button to enter Playback mode, use or keys to select the desired video clip or photo.

2.Press ▲ or ▼ to zoom in or out the image.

Video Clips Playback:

1.When video clips are displayed, press REC to play, and press again to pause;

2.Press or keys for fast forward or backward;

3.Press Mode to exit.

STEP 5. Delete Photographs and Video Clips:

1.Press MODE to select Playback mode.

2.Press and hold MODE button to enter Delete mode.

3.Select single or all then press REC to confirm.

Note: you can also press Delete button to delete photograph or video clips in playback mode.

Specifications

Sensor

 

5.0

Mega pixel CMOS sensor

Image

 

 

DV

VGA (640x480) / QVGA (320x240)

resolution

 

 

12.0 Mega pixels: (3920x2940) (Hardware Interpolation)

 

 

 

 

8.0

Mega pixels: (3264x2448) (Hardware Interpolation)

 

 

 

DC

5.0

Mega pixels: (2560x1920)

 

 

 

 

3.1

Mega pixels: (2048x1536)

 

 

 

 

1.3

Mega pixels: (1280x960)

 

 

 

 

VGA: (640x480)

Lens

 

F/2.8 f=8.5mm

Focus range

 

0.5m. ~ Infinity

Macro mode

 

11cm – 18cm

Digital zoom

 

8x

 

LCD display

 

2.0" real color LTPS TFT

White balance

 

Auto /Sunny / Cloudy / Fluorescent / Tungsten

Built-in memory

 

16 MB Flash memory

External memory card

SD card supports up to 8GB

File format

 

Picture: JPEG, Video: AVI,

PC interface / TV-out

USB 1.1 / NTSC, PAL

Power source

 

2xAA alkaline batteries. (rechargeable batteries not recommended)

Connect to TV

Yellow

Red

White

For standard

Audio

definition TV

 

TV

Connect to Computer

Software Installation:

1.Insert CD to your computer.

2.Select “Install MediaImpression”

3.Follow the onscreen instruction to install the software.

Connect to computer:

1.Power on ADVC01F

2.Slide the USB switch to open the USB connector

3.Connect ADVC01F to the USB port on your computer

4.ADVC01F will appear on your computer as a “Removable Drive” in “My Computer”

5.You can manage your pictures/videos using the

MediaImpression software or click on the

“Removable Drive” directly.

How to upload to Youtube from MediaImpression:

1. Select the video that you like to upload

3. Complete your YouTube

 

 

2. Click on the YouTube icon in menu bar

account information

4. Fill in the video info and click “Upload”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

Problem

Cause

Solution

 

 

 

Can not power on the unit

Low battery power. Battery placed at wrong

Replace or install the battery correctly.

 

polarities.

 

 

Photos can not be saved when

The memory card hasn’t been formatted

If the memory is full, use a different memory card. Format the memory card if it was

taking pictures.

correctly or memory is full.

not formatted.

 

 

Warning: Format will erase everything on the card.

Can not find removable disk after

 

 

 

connecting the camera to the

Connection failure.

Make sure all cable connections are secured and restart the computer if necessary.

computer.

 

 

 

Photos are blurry

1. ADVC01F is not held steadily

1.

Hold ADVC01F steadily until it beeps when taking video photo.

 

2. ADVC01F lens is dirty.

2.

Clean the lens with soft dry cloth.

 

3. ADVC01F is set to the wrong focus mode.

3.

Set the macro/normal mode according to the distances of subject.

If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.

E-mail:support@aluratek.com

Local (Irvine, CA): 949-419-6504

Web: www.aluratek.com/support

Toll free: 1-866-580-1978

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.

Warranty

Aluratek warrants this product against defect in material or workmanship for 1 Year from the date of purchase.

This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has been removed or altered on the product.

This warranty does not cover:

A)Cosmetic damage or damage due to acts of God

B)Accident, misuse, abuse, negligence or modification of any part of the product.

C)Damage due to improper operation or maintenance, connection to improper equipment, or attempted repair by anyone other than Aluratek.

D)Products sold AS IS or WITH FAULTS.

IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR IT'S DOCUMENTATION.

Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's products, contents or use of this documentation and all accompanying software, and specifically disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek reserves the right to revise or update it's product, software or documentation without obligation to notify any individual or entity.

Image 2 Aluratek ADVC01F Operating Instructions, Specifications, Connect to TV, Connect to Computer, Troubleshooting, Warranty
Contents Camera Settings Camcorder Settings Features and RequirementsPackage Contents Highlights and Application IntroductionWarranty SpecificationsTroubleshooting Operating Instructions

ADVC01F specifications

The Aluratek ADVC01F is a versatile and powerful digital-to-analog video converter designed to facilitate seamless connections between various multimedia devices. This compact device is ideal for users looking to connect modern digital devices to older analog displays or for those needing to convert video formats for compatibility. With the increasing prevalence of high-definition and digital content, the ADVC01F serves as an essential tool for both home entertainment systems and professional settings.

One of the standout features of the Aluratek ADVC01F is its capability to convert HDMI signals to composite video and stereo audio output. This means that users can easily enjoy digital content from sources such as laptops, gaming consoles, or media players on older TVs or projectors that may not have HDMI ports. The converter supports resolutions up to 1080p, ensuring high-quality video playback that captures the clarity of modern digital content, making it a perfect solution for presentations or home cinema setups.

The ADVC01F also boasts a user-friendly design that requires no additional drivers or software installations. It is a plug-and-play device, simplifying the connection process. Users can easily connect their devices with the included HDMI cable and RCA cables, making it accessible for users of all skill levels. Additionally, the durable chassis and compact form factor make it easy to transport, allowing users to take it to different locations, whether for business or leisure.

Furthermore, the Aluratek ADVC01F features built-in video scaling, which automatically converts video output to ensure compatibility with various display types. This adaptability ensures that users can enjoy a consistent viewing experience, regardless of the equipment they are using. The converter is powered through the USB interface, providing a straightforward power source that enhances its portability and ease of use.

In summary, the Aluratek ADVC01F is a robust and efficient digital-to-analog video converter that combines advanced technology with user-friendly functionality. By enabling users to connect contemporary HDMI devices to older displays, it bridges the gap between different technologies, facilitating an enriched multimedia experience. Whether for work, education, or entertainment purposes, the ADVC01F stands out as a reliable solution for anyone seeking to enhance their viewing capabilities.