Pelco TVJ6AC-1/LPP, C707M-B, AND TVJ6MS-1 operation manual Risk of Electric Shock Do not Open

Page 3

INSTALLATION/OPERATION MANUAL TVJ6AC-1, TVJ6AC-1/LPP AND TVJ6MS-1 MOTORIZED ZOOM LENSES

1.0 WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.

2.Unless the unit is specifically marked as a NEMA Type 3-6P enclosure, it is designed for Indoor use only and it must not be installed where exposed to rain and moisture.

This product may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

CAUTION:

TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

3.Only use replacement parts recommended by Pelco.

4.After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual

prior to installation and operation.

Pelco Manual C707M-B (11/96)

1

Image 3
Contents TVJ6AC-1, TVJ6AC-1/LPP TVJ6MS-1 Table of Contents List of IllustrationsRevision History Risk of Electric Shock Do not Open Description Installation Cable DistancesWiring ScopeSystem Configurations Pelco Manual C707M-B 11/96 LPP Type WiringMounting the Lens in AN Enclosure Auto Iris Adjustment2 TVJ6MS-1 Motorized Zoom Lens Mounting Zoom Lens on CameraRecommended Controls Track AdjustmentsCare and Maintenance ModelsReturns Warranty and Return Information